THERMIC FLUID HEATER
Liquid/Gas Fluid Heater
Thermic Fluid Heater are available in Horizontal & Vertical Models where ceramic fluid can be heated up to normal 340˚C at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel. Thermic Fluid Heaters are designed for all commercial & special fuels available in the market for combustion.
Type
Thermic Fluid Heater
Capacity
1 Lac Kcal/hr to 80 Lac Kcal/hr
Max.
Temperature
340Deg.C
Fuels
Wood, Coal, Furnace oil, LDO, Diesel, N. Gas, LPG etc.
Application
Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc.,
1) Wood Fired Thermic Fluid Heater
2) Electrical Thermic Fluid Heater
3) Diesel Fired Thermic Fluid Heater
4) FO Fired Thermic Fluid Heater
5) Husk Fired Thermic Fluid Heater
6) Coal Thermic Fluid Heater
Quality Assurance : ISO 9001 : 2008 since more than 15+ years
Salient Features of This Model
- Furnace is designed for multi fuel options, with major thrust on proper selection of combustion grate, furnace height, combustion volume, fuel feeding systems. To ensure efficient combustion & lesser heat loss.
- Coils are designed with optimum flow consideration to gain maximum heat from flue gases. Coils are tested at 3 stages before final dispatch as a part of Alpha stringent quality control.
- ID Fan, FD Fan & booster fan (in any) are selected as per fuel’s perfect air-fuel ratio requirement, which ensures optimum air quantity for combustion & thus saves power consumption.
- Expansion Tank capacity is specifically selected after consulting total holdup of Thermic Oil. Deaeration Tank is specially designed considering flow & temperature requirement.
- Alpha offers complete solution of Thermic Fluid heating system along with Pipeline, Pollution control equipments, fuel handling, etc on Turnkey basis.
Salient Features of This Model
Thermic Fluid Temperature control
Digital temperature indicator-cum-controller cut of ID/FD fan of preset temperature and restart of preset temperature and restart of preset differential temperature to maintain system temperature..
Stack Temperature Control
A blind temperature controller cut of ID/FD fan and sound alarm if stack temperature exceeds to preset temperature.
Low/NO Flow of Thermic Fluid
Differential pressure switch connected across intel and outlet headers signals low flow alarm in case of low fluid pressure of Thermic fluid in coils.
Low Level of Thermic Fluid
The visual level indicator and float actuated lever switch fitted in the expansion tank signals alarm in case of low-level thermic fluid in the system.
Thermic Fluid Pump Motor Trip
In case of thermic fluid pump motor trip, electrical interlocks, cut off ID/FD fan.
Power Failure
Diesel engine drive keeps thermic fluid moving in the system to prevent its degradation and overflow.
Excess Furnace Bed Temperature
Digital temperature indicator-cum-controller senses furnace bed temperature and cut off ID/FD fan above set value(for FBC unit).
Benefits
- Multi-Fuel Option
- Low Power Consumption
- Energy Optimization
- Low Maintenance
